-------------------------------- 09-03-2009 Build 4.6.1.0 release -------------------------------- - This release is named 4.61 - Updated Hikvision SDK to V5.1. This update includes support for the new DS42XX Series Cards. - Fixed issue with playback not displaying correctly with 64 channel server and Overlay enabled. - Resolved an issue with new SDK not handling a large number of playback channels correctly. - Fixed an issue with initial client startup hanging if user's region used comma as the decimal separator. -------------------------------- 08-10-2009 Build 4.6.0.0 release -------------------------------- - This release is named 4.6 New Features: - Bandwidth Throttle - allows the user to limit bandwidth used by clients to connect to a server. - Replay Proxy - Client now has ability to connect to a replay proxy server, which will cache server remote recordings locally. - This results in better playback performance for reviews from a remote Client especially over a low bandwidth connection - HikVision and Axis Multi-Channel IP Devices - Added support for HikVision and Axis Multi-Channel IP devices. - Tested on Axis 241Q Video server and HikVision DS-6101HFI-IP. - Video Scrubbing - dragging timeline cursor across playback timeline will actively display video data throughout timeline. - PCI Audio - audio can now be received via PCI bus. No need for audio cable from the Encoder to the Motherboard. - Remote Restart - client software now has the ability to remotely restart server within Remote Server Control. - Improved Disk Performance - significantly improved disk write performance on servers. - Improved Client Live View Performance - significantly improved live view performance, enabling users to view more live view simultaneously. - Changed license structure - - After upgrading to 4.6, user may need to re-license their software. - This change should only affect users who are using IP devices or client embedded devices. - Added a keyframe multiplier value into Server setup.ini. This allows users to modify the keyframe interval. Fixes: - Disabled disk cycling on client when client local recording is disabled - Disabled matrix tab option if there are no Decoder cards available - Changed default keep days for events on server from 31 days to 7 days. - Improved Instant Playback by using last recording time rather than current time. - Added new export clip forms to embedded video playback - Added extended tools menu into playback Tools section as well. Extended tools can be created within setup.ini. - Removed extraneous permissions options within server settings. - Fixed some inconsistent labeling between remote server setup and local server setup. - Fixed a performance issue with Arecont IP devices using H.264. - Fixed an issue where video was not being redrawn when paused. - Fixed an issue where seek was not letting users go back across a gap in the timeline. - Fixed an issue where the event log recycling procedure may lock up the Server UI, causing a restart. - Fixed an issue where sensors were not auto recovering their state after server restarts. - Fixed an issue where autoscan was not automatically starting after server restarts. - Fixed an issue where exported IP video was not correctly drawing alarm video segments. - Fixed an issue where shutting down server with Arecont IP device caused an access violation. - Fixed an issue where client live view screen was not drawn correctly upon adding a server for the first time. - Fixed an issue where exiting server setting page would cause server UI to not respond. - Fixed an issue where canceling out of export form on server then shutting down caused an error. - Fixed an issue where pausing video at the beginning of the day could cause playback control to be not available anymore. - Fixed an issue where connection messages in system message area was not showing the correct server IP. - Fixed an issue where remote setup was showing incorrect Axis IP settings. - Fixed an issue where CD/DVD burning form was not showing network drives. - Fixed an issue where playback would not display video after user enters Settings for the first time on server. - Fixed an issue where auto preview off was not being enabled correctly on dual monitor setups. - Fixed an issue where having live view and playback open on client while going into Settings was causing an error. - Fixed an issue where user could not disable auto-login to windows option on client. - Fixed an issue where sync exporting embedded and hik video used incorrect export form. - Fixed an issue where clip viewer was not using enough space for description within video information. - Fixed an issue where going into full screen for Hikvision IP camera in clip viewer did not show video. - Fixed an issue where user could not restore clip viewer controls after hiding it. - Fixed an issue where exported IP device MPEG video did not play correctly in clip viewer. - Fixed an issue where changing windows regional settings to a different date format could cause server to not start. - Fixed an issue where Hikvision IP device showed incorrect settings in server setup. - Fixed an issue where alarm messages from embedded devices were not being received in the correct order. - Fixed an issue where exported IP device video included gaps incorrectly in the timeline. - Fixed an issue where Panasonic IP device remote settings were not correctly displayed. -------------------------------- 05-05-2009 Build 4.5.3.0 release -------------------------------- - This release is named 4.530 New Features: - Changed disk id structure (NOTE: This change requires the client to retrieve server properties from the upgraded server to resume functionality). - Client now has ability to auto-scan existing groups. - Playback now has new seek feature functionalities. User is now able to set a custom start time for all recordings. - Export Clips - Significantly increased export speed. - Clip export now supports multi-clip exports and sync play exports - Exports now no longer block the UI. - Multiple exports can now be done at the same time and can be paused. - Introduction of a new export clip download manager - NOTE: Windows 32 bit Operating Systems have a Maximum EXE size of 4GB. Any self-executable EXE bigger than the maximum sizes are unplayable. - They must be played within the Clip Viewer. - Improved stretch live view performance. - Added support for Hikvision IP camera (NOTE: This does not include Hikvision IP Video Servers). - Passwords now can include special characters for increased password strength. - Client on startup now auto updates any camera name changes from the server. - Client now has a new option available on UI to add all currently shown live view or playback cameras to a new group. - Client now will attempt to reconnect to the server if the server goes down unexpectately. - Support for Axis H.264 IP camera (BETA) Fixes: - Fixed an issue where matrix out audio was not available. - Fixed an issue with embedded alarms not being received by client until server properties is retrieved again. - Fixed an issue where embedded alarms in conjuntion with full screen on alarm feature was not working as intended. - Fixed an issue where motion frames from stretch cards were not being initialized correctly, causing motion search to miss some search results. - Fixed an issue with server manager wizard not allowing a new server to be managed using a template. - Fixed an issue where server live view port was not binding on all interfaces. - Fixed an issue where recording file may write to the wrong file if two files gets created with the same name. - Removed some unused image file extensions in the save image option in image process. - Fixed an issue where the replay server may not start correctly when user turns on remote client service in server setup. - Fixed an issue where live viewing axis 207 camera caused an error on the client. - Fixed an issue with unable to retrieve properties for ip cameras using non-default ports. - Fixed an issue with client and server setup tool causing some errors. - Fixed an issue where stretch and certain ip cameras may receive false video loss alarms. - Fixed an issue where some embedded box alarms may not be received by the client software. - Fixed an issue where clients may still receive embedded box alarms even after the device has been removed from server list. - Fixed an issue with sync export not working across different days. - Fixed an issue where client may give an error while shutting down. - Fixed an issue in clip viewer where clips with sizes greater than 4GB were not played correctly - Fixed a display issue in export clips viewer - Full screen in clip viewer is now completely full screen and does not show window bars. - Fixed an issue with replay server on server side causing an error during client playback - Fixed an issue where adding a new video profile was causing an error. - Fixed an issue where instant replay was not working correctly in release 4.520 - Fixed an issue where user could not enter full screen using keyboard shortcuts after adding a new camera group in client - Fixed an issue where restore setting option in setup tool was not completing successfully if Setup configuration was not already created. - Fixed an issue where going into full screen in playback was causing some UI errors. - Limited maximum length of group name when creating a group using add group option on UI. - Some minor ui adjustments were done. - Updated hover text on some playback icons. - Modified so if recording is not available at the specified seek time for a particular camera, the recording defaults to 5 minutes before the end of available recording. -------------------------------- 04-01-2009 Build 4.5.2.0 release -------------------------------- - This release is named 4.5.2.0 Beta New Features: - Add support for Hikvision IP camera - Clip export now supports multi-clip exports and sync play exports - Passwords now can include special characters - Client on startup now auto updates any camera name changes from the server - Client now has the option to add all currently live view cameras to a new group - Client now will attempt to reconnect to the server if the server goes down unexpectately - Support for Axis H.264 IP camera (beta) -------------------------------- 02-26-2009 Build 4.5.1.0 release -------------------------------- - This release is named 4.510 - Added support for additional Stretch Encoder Cards: VCC6416, VRC6004, VRC6008 - Fixed a license issue with Stretch Encoder Cards. -------------------------------- 02-01-2009 Build 4.5.0.0 release -------------------------------- - This release is named 4.500 New Features - Added support for Stretch encoder card types - Added support for client connection to Integral Digital Sentry Servers. - Added support for Panasonic IP cameras (Notes below on some Known Issues) - NOTE: Panasonic cameras NS202, NS202A, NS954, and NW964 cannot use Server to set up motion areas, even though there is currently no indication of this within the software. Turning on motion detection will turn on motion detection for whole video window. - NOTE: Panasonic cameras do not return the specific motion area that motion was found in. This means that if a Panasonic IP camera has multiple areas, It will only be the first motion area to display an alarm when triggered. - NOTE: Panasonic Models NW484, NF302, and NS954 and some others have a known Panasonic firmware issue that causes a camera color change after resetting the IP camera. To fix this, configure the device using its web setup. In "Camera Setup" => "Image" => "Image Adjust", Click "RESET" on the Red/Blue Gain, and the Aperture/Pedestal Level. Once you've fixed this, the problem should not happen again until you reset the camera. A fix may be available in later firmware versions. - NOTE: Due to an undocumented change in operation, some cameras may not be able to use our software to modify the on-screen camera name. The camera name in our software will be able to change, but to change it on the OSD, you must use the cameras web setup. Go to "Camera Setup" => "Cam Function". The only camera we've found with this change so far is the NF302. - NOTE: If, when using Panasonic's web software, you get a "Concurrent Access Limit" screen, you can still view the camera by switching from "MPEG-4" to "JPEG" on the "Image type" on the left. - NOTE: Testing has been done on NW484, NF302, NP244, and NS954 models. Most other models should work, although the NP1004 may have a few problems as it has a significantly different feature set. - (BETA) Added support for Sony IP cameras - NOTE: Testing has been done on SNC-DF40N model. - (BETA) Added support for ACTi IP cameras - NOTE: Testing has been done on ACM-1231 model. - (BETA) Added support for Arecont IP cameras - NOTE: Testing has been done on AV3130M model. - Weekly Review - Tool to search multiple cameras and display recording data from searched cameras - Added backplay ability to Exported clips. - NOTE: Backplay will only be available to newly exported clips using 4.5 release. Old exported clips will not have backplay functionality. - Bookmark Mouseovers - Hovering over bookmarks in timeline now shows time and description summary of bookmark. - Client Setup Tool now forces decoder cards to live view automatically. - Additional default alarm sound choices included. Fixes - Alarm Panel now exits after all alarms entries are deleted by user. - Added additional device information into IP camera setup tool when retrieving camera properties. - IP Setup Tool now indicates when a retrieve was successful. - Changed CD Burner form to now allow usage of application main form while CD burner form is open. - Fixed an issue where IP camera reconnect events were causing the application to pause. - Fixed an issue where IP camera backplay was not smooth. - Fixed an issue where the remote event log was causing an error in some cases. - Fixed an issue where motion search was taking too long to return search results from servers with a large number of recordings - Fixed an issue where motion search was including old search results when executing a new search - Fixed an issue where motion search was displaying random images while searching. - Fixed an issue where the send email form body text field did not have any scroll bars. - Fixed an issue where an error would result when server starts with only IP cameras and decoder cards. - Fixed an issue in dual screen setup concerning playback states. - Fixed an issue in IP Setup Tool to not allow device numbers to duplicate - Fixed an issue in exported clips where backplay was not working in full screen. - Fixed an issue where the server would not start correctly if xml bookmark path was not defined correctly in setup.ini - Fixed an issue in playback concerning play all mode. - Fixed an issue in playback conerning sync play using hardware channels. - Fixed an issue where autoscan with only one camera on server was causing incorrect behavior. - Fixed an issue in clip mode where the clipping form can get lost behind the main application UI. - Fixed an issue where shutting down the client before logging in would cause an error. - Fixed various performance issues. - Fixed various improper shut down issues. -------------------------------- 11-21-2008 Build 4.3.0.0 release -------------------------------- - This release is named 4.300 New Features: - Backplay - Playback recordings can now be played backwards. - Smooth play - all channels are now available for smooth fast forward. - Snapshot on pause - snapshots are available on recordings while paused. - Embedded fast forward - embedded playback now supports more fast forward speeds. - Watchdog - ini file for watchdog has a configurable timeout setting for customized amount of time watchdog will wait before restarting a hanged server. - Client login - first time login to client now requires user to input a password for main 'system' account, like server. - Client shutdown - user no longer needs to be logged into client to shut down client application. Fixes: - Improved audio and video frame rate qualities. - Increased motion sensitivity. It was not very sensitive before - Fixed an issue where dual stream enabled caused recordings to be choppy - Fixed an issue where licensed boxes were still running on the 30 days demo count. - Fixed an issue where per day disk cycle was not being done correctly. - Fixed an issue where per day disk cycle on startup of server was very slow. - Fixed an issue where server camera quality seen on client side was off by one. - Fixed an issue where turning off permissions for the 32nd channel on server caused playback to fail. - Fixed an issue where saving a ptz tour group caused the server to hang on next startup. - Fixed an issue where in some cases exiting sync play caused motion search option to be greyed out in playback - Fixed an issue where in some cases motion search were not returning any results due to resizing the picture. - Fixed an issue where viewing bookmarks in dual screen configuration caused server live view to turn off. - Fixed an issue where in some cases client remote setup was not allowing relays to be managed when server was on schedule. - Fixed an issue where the description fields in exported clip menu were editable while export was happening - Fixed an issue where the hour timeline cursor was a little too low - Fixed an issue where in some cases coming out of frame by frame caused playback control states to be incorrect. - Fixed some minor export clip issues. -------------------------------- 11-05-2008 Build 4.2.4.3 release -------------------------------- - This release is named 4.243 Fixed Issues: - Fixed an Issue where licensed servers will still inform users that their trial licenses have expired. - Tweaked motion sensitivity values to be more sensitive. -------------------------------- 10-19-2008 Build 4.2.4.2 release -------------------------------- - This release is named 4.242 Fixed Issues: - Added DST fix. Lost hour will now be contained in a special DST folder that is viewable in Playback through DST timeline. - Increased client event log days to more than one year. - Removed limitations of trial mode to only 30 days. - Added ability to use domain name users when auto-login to windows. - No video sources message when starting server modified to be more informative - Fixed an issue where last few seconds of certain days were not being played back. -------------------------------- 09-04-2008 Build 4.2.4.1 release -------------------------------- Known Issues: - Embedded device motion alarms are off by one in alarm window. Hikvision issue. - Added more options for Fast Forward. Higher than 2x will have some issues and are still in beta form. Fixed Issues: - Added ability to use DNS names for both embedded devices and DVR Servers. - Added additional embedded device compatibility. - Added audible alarms back into client for alarms. - Fixed an issue with not able to close playback on single screen in certain cases - Fixed an issue where first embedded box added does not show live view or playback until the - client is restarted. - Fixed an issue where the emap was not auto-appearing on embedded device alarms if option is chosen. - Fixed an issue where client call/set preset commands to IP cameras were not being accepted. - Increased amount of days user can keep event logs to more than one year. - Fixed an issue where relays were being handled by schedules as well. - Fixed an issue where recording using schedules caused a small gap in recording at midnight. - Fixed an issue where currently recording video files were not playable in playback - Fixed multiple issues regarding embedded client sensor alarms. - Fixed an isseue with remote control message regarding sensor alarms. -------------------------------- 08-08-2008 Build 4.2.4.0 release -------------------------------- - This release is named 4.240 - Fixed an issue where having the server in auto-preview off mode for more than 50 days caused server to lock up. - Fixed an issue with server demo license - Added manual input of export clip start and end times - Improved startup latency on client live view - Added the ability to close all playback channels all at once. - Playback UI will automatically open if the application is running in dual monitor mode. - Channels dragged into playback will now start five minutes before the most recent recording. - Added minimize functionality to Client live view, Client Playback, and Server Playback. - Export clips menu now has the option to specify the exact start and end time for a clip. - Fixed an issue where selecting another channel after selecting an ip camera causes an error in client remote setup. - Fixed an issue where using ptz controls on last camera in camera list was causing range check errors in client remote setup. - Dual stream message notifying user that encoder card does not supported hide half ability no longer shows during server startup all the time. The message will show when user attempts to use dual stream on - Fixed an issue where audio through a hardware decode channel was not working correctly. - Fixed an issue where videos that has less than a 40 second gap in between files causes playback to not skip over the gap. - Fixed an issue where enabling dual stream on all channels, then starting recording on all channels would stop client live view. - Fixed an issue where enabling dual stream caused all motion data to be lost. - Fixed an issue where audio through an ip camera was causing a buzzing noise. - Fixed an issue with network latency of a ptz camera. - Fixed an issue where the cancel button was being displayed incorrectly during a export clip process if user stopped in the middle of the process. - Fixed an issue with instant replay at midnight. The behavior for instant replay now is to go back to the very beginning of the current day, not to the day before. - Fixed an issue where playback of the first channel was not working. - Fixed an issue where starting playback of a channel that just started recording was causing an access violation. - Fixed an issue with IP camera motion alarm data causing slight gaps between the non-motion and motion recordings. - Fixed an issue where there was a skip when transitioning from normal video to motion video in playback. - Fixed an issue where removing a server that has system messages displayed will cause access violation when trying to scroll through those messages. - Fixed an issue where going into full screen in playback with video playing caused an access violation. - Fixed an issue where trying to go to frame by frame from instant replay, zoom, or play all was causing some state issues. - Fixed an issue where going back to time where other channel have no recording more than once causes playback to speed up while in sync play mode. - Fixed an issue where trying to playback a segment of video at a time where other channels have no more video paused playback while in sync play mode. - Fixed an issue where dragging large video files or folder larger than 2gb seems to cause range check error in the disc burning utility. - Fixed an issue in Live view where dragging in groups to live view with small number screen configurations caused unpredictable screen displays. - Fixed an issue where opening two clips created a range check error and access violation on the second video clip. - Fixed an issue where Multiple screen output change to single still counts cameras as being open in output. - Fixed an issue where adding a bookmark through frame mode shows video time as 1899-12-30 00:00:00. - Fixed an issue where ptz presets did not work on IP cameras from the Client. - Exported clip viewer only shows .mpg and .exe files. - Fixed an issue where an operator who does not have permission to shut down is still able to shut down using alt-f4 keyboard shortcut. - Added a message indicating that Server should be restarted once you change storage locations. - Fixed an issue where having a channel in live view causes playback audio volume bar to not function. - Removed option to turn automatic deletion off. Automatic deletion should always be on. - Fixed an issue where Embedded device video streams were causing an access violation on close in live view. - Fixed an issue where turning on local recording for ip camera then dragging camera into live view caused a range check error. - Fixed an issue where server must be restarted at least once before playback will locate video recording correctly. - Fixed an issue where displaying motion area in live view, then going into setup causes first camera motion areas to display. - Fixed an issue where motion area right click menu is different than in local setup and in remote setup. - Fixed an issue where having audio turned on and exiting the system caused an access violation in the web client. - Fixed an issue where smart search temorary data files were not being deleted when application exited. - Fixed some spelling errors and grammar throughout the application. - Fixed an issue where viewing a live view channel from one embedded device will stop a live view channel from an already being viewed embedded device. -------------------------------- 07-27-2008 Build 4.2.3.6 release -------------------------------- - This release is named 4.236 - Fixed issue where Sub stream from embedded devices were not being used. - Fixed license issue where non-unique serial numbers from embedded devices were being used. - Fixed issue where camera feeds from different embedded devices were showing incorrect video. -------------------------------- 07-02-2008 Build 4.2.3.5 release -------------------------------- - This release is named 4.235 - Modified external player to allow full screen on ESC. - Export Clip now allows time to be entered manually when exporting. - Modified external player to allow frame mode. - Reduced latency on analog cameras for client live view. - Added option to disable client local recording. - Added label on login form to indicate default user name. - Added option to not allow video profiles to be modified. - Fixed issue where sync play was not behaving correctly across days. -------------------------------- 05-06-2008 Build 4.2.3.1 release -------------------------------- - This release is named 4.231 - Fixed issue where enabling dual stream then starting server recording caused client live view to malfunction. - Fixed issue where hardware decoders were not outputting audio correctly. - Fixed issue where server was not saving camera ptz settings correctly. - Fixed issue where a disconnected server was causing a bigger timeout on the client than expected. - Added a configurable value into Client ini file for timeout on event posts (for managed clients). -------------------------------- 04-18-2008 Build 4.2.3.0 release -------------------------------- - This release is named 4.230 - Schedules no longer check for Hard disk ID - Fixed an issue where the client performance was degraded when more than four high resolution live view channels were viewed. - Removed current functionality of Frame by Frame. - New Frame forward feature to replace frame by frame - frame forward and back one frame at a time. Limitations are that user can only go back to the point where they started frame forward. To go back more, must use timeline to move back to a point before then and go forwards. - Fixed issue where playback of recorded video from embedded machine was causing a memory leak. - Fixed issue where exported self-executable video was not playing back the last part of the video. - Fixed issue where local recording of embedded machines was not being done correctly. - Fixed issue where playback of pre-recording alarm video was failing. - Versioning number is no longer shown in Setup. - Modified alarm labels within setup to be more correct with their usage. - Fixed issue where error occurred when the client shut down. - Fixed issue where the sensors were not turning off correctly when in alarmed state. -------------------------------- 04-03-2008 Build 4.2.2.0 release -------------------------------- - This release is named 4.220 - Fixed issue where 4.2 Web Client could not co-exist with 4.1 Web Client - Fixed issue where 4.2 Web Client was causing an error when trying to live view a channel - Fixed issue where exiting web client could cause an error. - Fixed issue where the default storage location was not being assigned correctly when starting the server for the first time. - Fixed issue where embedded box playback behavior was incorrect - Fixed issue where dragging an entire group into playback was causing a slow-down in application performance. - Fixed issue where sensor icon in main gui was not toggling correctly for sensors greater than maximum number of cameras. -------------------------------- 03-20-2008 Build 4.2.1.0 release -------------------------------- - This release is named 4.210 - Changed database type for client event logging. - Fixed issue in playback where recordings couldn’t be played if storage locations were changed. - Fixed issue in client event log where going into event log and clicking around a few times caused lock-up - Fixed in client system messages window was not populating with entries - Added additional screen limitation into Client Setup Tool - Fixed an error that appeared when server was shut down. - Fixed issue with storage path not being allowed to change from default. - Fixed issue with startup where log files were being created to location of where user saved the license request file. - Modified error message when user tries to save with no storage location defined in setup. - Fixed issue where client was not starting if an older client log database was within client directory. - Fixed issue during client startup where if no client database was encountered, application would still try to delete the file. - Fixed an issue in clip export where beginning an export and then immediately canceling the export was causing an error. -------------------------------- 03-14-2008 Build 4.2.0.0 release -------------------------------- - This release is named 4.2 - Added Axis IP Camera Support. - Live view Axis IP camera through DVR Server - Record and Playback from Axis IP Cameras - Export IP recordings - Added Hikvision Embedded DVR Support. - Live view of Embedded DVR through DVR Client - Full access to all Embedded DVR Settings remotely - Remotely view recorded video from Embedded DVR - Added Integration with Enterprise Management Suite - Added POS Integration - Enhancements - Server setup information stored in instance based xml file rather than within the registry. - Improved Client loading times during large installations - Improved memory management and usage of both Server and Client. - Improved loading playback cameras - Users are now able to double click on a camera to load that camera into an empty channel. - Added Client Splash screen to notify when Client is starting up. - Alarm bar in client no longer flashes when an alarm is triggered. The bar will appear when an alarm is triggered and clicking on the bar will take the user to Alarm events viewer. - Fixed issue where exported self-executable clips were not playable. - Fixed issue where local recording was not recycling. - Fixed issue where user sometimes could not log into the web client. - Fixed issue where trying to save storage location gave an error. - Fixed issue where on user was able to drag playback channel into a live view channel on dual monitors. - Fixed issue where cameras assigned to the last channel was not behaving correctly in live view. - Fixed issue where viewing a camera in setup the first time you add a server was causing an error. - Fixed issue where static images for certain screen configurations were not sizing correctly when going into full screen mode. - Fixed issue where adding a lot of motion areas to a camera would cause the server to be unresponsive when exiting setup. - Fixed issue where user could not start or stop recording remotely from client. - Modified time out message when trying to retrieve server properties from client so that it is no longer just a blank message. - Fixed issue where login with a user without playback permission with the playback window still open did not close the playback window automatically. - Fixed issue where user with no playback permission was able to bypass this through alarm viewer. - Fixed issue where choosing instant replay option in alarm viewer would close the alarm viewer. - Fixed issue where setup would open on the secondary monitor rather than the primary on a dual monitor configuration. - Fixed issue where automatic restart of server while desktop was locked caused and error. - Fixed issue where going into client setup was timing out. - Limited maximum number of motion areas that can be added to a single camera to 15. - Fixed issue where Auto Load Group setting was being ignored if auto-login to application was turned on. - Fixed issue where going into full screen in playback caused an error. - Fixed issue where playback was broken in dual screen. - Fixed issue where recorded audio was not played if channel had previous recording with no audio. - Fixed issue where Server setup tool was not resetting settings to default. - Fixed issue with logging out of server causing error. - Fixed issue with switching users between live viewing IP cameras causing an error. - Fixed issue with server startup progress bar. - Set default recording time to 15 minutes. - Fixed issue where having check user enabled in remote client disabled ability for system user on server to view local playback files. - Fixed issue where right clicking on camera list enables some functionality that should not be available. - Fixed issue where having Pre-record on caused recording to be dropped when an alarm triggered. - Fixed issue where new video profile was not selectable until another camera was selected. - Fixed issue where start all and stop all live views still worked in auto-scan mode. - Fixed issue where coming out of setup sometimes made application unresponsive. - Fixed issue where Send to email on motion detection created snapshots with bad file extensions. - Fixed issues where trying to drag a playback screen into matrix out produces an odd error. - Fixed issue where exiting client sometimes caused an error. - Fixed issue where playback stopped working after you entered frame mode. - Fixed issue where clicking on camera list after exiting setup sometimes caused an error. - Modified message displayed when trying to save a video profile with a blank name. - Fixed issue where Digital zoom did not work on IP cameras. - Fixed issue where exported clip of IP cameras did not work. - Fixed error when adding videos or images to burn directory on client. - Fixed error when clicking on image or video in burn directory on client. - Fixed issue where having backslashes and empty spaces at end of CD and folder name in burn tool caused those folders to be unreadable. - Fixed issue where choosing instant replay from live view in dual screen mode created some incorrect states. - Fixed issue where taking a snapshot while in fast forward mode, then going into snapshot viewer was causing an error. - Fixed issue where Snapshot to Email option for IP cameras did not send correct snapshot pictures. - Fixed issue where taking a screenshot while Autoscan was on required clicking on the screen first. - Fixed issue where right click with left click held down allowed access to settings without stopping live view. - Fixed issue where trying to open another instant playback from the Emap with all screens filled already caused an error message.